KitchenAid KHM720 Bedienungsanleitung PDF herunterladen (Seite 8)

How To Use the Hand Mixer

When Using a Pair of Accessories

1.

2.

Unplug the hand mixer from the

electrical outlet.

Insert the accessory shaft with the

collar (A) into the larger opening (B) of

the hand mixer. Align the flanges on

the shaft with the slots in the opening.

Push to lock into place.

3. Insert the accessory without a collar (B)

into the smaller opening (A). Align and

push to lock into place.

When Using a Single Accessory

An accessory shaft without a collar may be

used in either opening (A or B). Those with

a collar may only be used in the larger

opening (B). For attachment instructions,

see "When Using a Pair of Accessories."

To

1.

2.

3.

Remove Accessories

If the hand mixer is running, stop the

hand mixer by touching the "Off"

button.

Unplug the hand mixer from the

electrical outlet.

Pressthe Ejector Button (C) to release

the accessories from the hand mixer,

then remove them.

i!!i!i!iiiiii!i ......._ C

,i ilii

To Operate the Speed Control

Injury Hazard

Unplug mixer before touching

beaters.

Failure to do so can result in

broken bones, cuts or bruises.

NOTE: Flashing light indicates ready to

operate. Do not touch beaters. If the hand

mixer runs when "0" is flashing, or there is

nothing displayed on the speed indicator,

do not use it. Arrange for service:

In USA call 1-800-541-6390

In Canada call 1-800-807-6777

1. Plug the hand mixer into an electrical

outlet.

2. Pressthe "On" button, and the Speed

Indicator will flash "0." This indicates

the hand mixer is ready to operate.

3. Touch the "On" button again and the

hand mixer will start on speed one.

4. To increase the speed, press the Up

arrow (A). To decrease the speed, press

the Down arrow (Y).

5. When the mixing job is finished, shut

off the hand mixer by touching the

"Off" button. Unplug hand mixer

before removing accessories.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 58 59

Kommentare zu diesen Handbüchern

Keine Kommentare