9
Warning: use protective gloves for the following operations.
Follow these instructions very carefully to prevent injury and
damaging the oven door and hinges.
How to remove the oven doors:
1. Open the door fully (see fig. 1).
2. Lift the two catches and push them forward as far as they can go
(see fig. 2).
3. Partially close the door to remove it, lifting it upwards (see fig. 3).
How to remount the door:
1. Insert the hinges in their grooves and lower the door fully.
2. Lower the two catches again.
3. Fully close the oven door.
Attention: to prevent damaging the oven door and hinges as
well as personal injury, follow the instructions above carefully.
Clean it only after the oven has cooled down.
To lower the upper grill heating element (Top oven)
•
Pull the heating element slightly forward (fig. 4) and lower it (fig. 5).
Changing the rear oven lamp bulb (Lower oven):
1. Disconnect the oven from the electrical supply.
2. Let the oven cool before turning the lamp cover left to unscrew it
(see fig. 6).
3. Change the bulb (see note).
4. Screw the lamp cover back on.
5. Reconnect the oven to the electrical supply.
Note: only use 40 W - 230V lamps, such as E-14, T 300°C,
available from the After Sales Service.
Important: do not use the oven without replacing the lamp
cover.
Changing the rear oven lamp bulb (Top oven):
1. Disconnect the oven from the electrical supply.
2. Let the oven cool before turning the lamp cover left to unscrew it
(see fig. 6).
3. Change the bulb (see note).
4. Screw the lamp cover back on.
5. Reconnect the oven to the electrical supply.
Note: only use 25 W - 230V lamps, such as E-14, T 300°C,
available from the After Sales Service.
Important: do not use the oven without replacing the lamp
cover.
Care and maintenance
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Kommentare zu diesen Handbüchern