KitchenAid KHGD4 60510 Bedienungsanleitung PDF herunterladen (Seite 10)

The electrical connections must comply with current

legislation and be carried out by a qualified, competent

person.

• Information on the voltage and power absorbed are shown on the

serial no. plate.

• The appliance must be earthed.

• When installing the appliance, we recommend that this hob

is protected by a 3mm bi-polar switch.

• If damaged, the power cable must be replaced with an

identical type of powercable ( H05V2V2-FT90 ºC, or

H05RR-F type). We recommend that this operation be

conducted by our After Sales Service. Please contact our

Customer Care Centre on 00800-3810-4026.

• Do not use extension cables.

• The manufacturer declines all responsibility for damage to

persons, pets or goods as a result of failure to comply with

the regulations above.

Electrical connection

Earth

(yellow/green)

After having cleaned the perimeter surface, apply the supplied

gasket to the hob as shown in the figure.

Position the hob in the worktop opeing made respecting the

dimensions indicated in the instruction.

Note: the power supply cable must be long enough to permit

its upward extraction.

To secure the hob, use the brackets (A) provided with it. Fit the

brackets into the relevant bores shown by the arrow and fasten them

by means of their screws in accordance with the thickness of the

worktop (see the following figures).

Installation

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

KitchenAid KHGD4 60510 Bedienungsanleitung Seite 10