KitchenAid KHDP1 38510 Bedienungsanleitung

Instructions for useGBNL

Gas connection ISO 7/1ISO 228/1 (FR)WARNING! This operation must be performed by a qualifiedtechnician.• The gas supply system must comply with local

The cook top is designed to be built in to a work surface as shown in the figure.Before installing the cook top, install the gasket seal around the e

Note: Refer to the table on page 6 to ensure the correct type of injector is to be fitted.Note: Before installing the hob, please remember to stick th

13Before any cleaning and/or maintenanceoperation, disconnect the hob from powersupply and wait until it is cold.To keep the hob in perfect condition,

14If the hob is not working properly work throughthe this guide before contacting our CustomerCare Centre.The burner does not ignite, or the flame isu

400010780629Printed in Italyn04/15Whirlpool Europe - Socio UnicoViale G. Borghi, 27 - 21025 Comerio (VA)Phone 0332.759111 - Fax 0332.759268www.whirlpo

Product description and symbols 4Using the burners 4Practical advice on using the hob 5Positioning the pan supports and wok support (also as spacer) 5

1. Removable pan stand grids2. WOK burner3. WOK burner control knobProduct description and symbolsqweTo turn on one of the burners:1. Turn the corresp

Read the instructions to get the best out of yourhob.- Use pans with a similar diameter to the burner(see the table on this page)- Use flat bottomed

This appliance is not provided with a combustionproduct discharge. It is recommended that it be installed insufficiently aerated places, in terms of t

CategoryII2L3B/PRefer to the injector table of your CountryElectric supply:220-240 V ~ 50/60 Hz 0,6WInjectors tableType of gas usedTy p e o f burne

8• In the event of prolonged usage, additionalventilation may be required (opening a windowor increasing the extration speed of the hood).Warning• K

EC Declaration of conformityThis appliance has been designed, constructed and marketed in compliance with:- safety requirements of "GAS" Dir