12
- Never use steam cleaners.
- Before cleaning, make sure the cooking zones are switched off and that the residual heat
indicator ("H") is not displayed.
IMPORTANT: do not use abrasive sponges or pan scourers. as they could ruin the glass surface.
•Clean the hob, when it is cool, after each use in order to remove any food residues.
•Sugar and foods with a high sugar content damage the glass ceramic surface and must be immediately
removed.
• Salt, sugar and sand can scratch the glass surface.
• Use a soft cloth, absorbent kitchen wipes or a specific hob cleaner (follow the Manufacturer's
instructions).
WARNING
Cleaning
• Read and follow the instructions given in the section "Instructions for use".
•Connect the hob to the power supply and make sure there is no outage.
•Clean the hob and dry it thoroughly.
• If you are unable to turn the hob off after using it, disconnect it from the power supply.
•If alphanumeric codes appear on the display when the hob is switched on, proceed according to the
following table.
Troubleshooting guide
ERROR CODE DESCRIPTION POSSIBLE CAUSES CURE
The hob switches off
and after 30 seconds
emits an acoustic signal
every 4 seconds.
Continuous pressure on
control panel area.
Water or kitchen
utensils on the control
panel.
Clean the control panel.
C81, C82 The control panel
switches off because of
excessively high
temperatures.
The temperature inside
the electronic parts is
too high.
Wait for the hob to cool
down before using it
again.
F42 or F43 Incorrect hob
connection voltage.
The sensor detects a
voltage different from
that of connection.
Disconnect the hob
from the mains and
check the connection.
F12, F21, F25, F36, F37,
F40, F47, F56,
F58, F60
Call the After-Sales Service and specify the error code.
Kommentare zu diesen Handbüchern