KitchenAid KCBSX 60600 Bedienungsanleitung PDF herunterladen (Seite 18)

The appliance must be installed and tested in full compliance with the accident prevention laws and

regulations, of the traditional and current regulations.

ELECTRICAL CONNECTION

Before installing the blast chiller, make sure that the existing electrical systems are in compliance with the

law and suitable to the data of the rating plate of the appliances to be installed (V, kW, Hz and power

available). The appliance is supplied with a 2.50 m long power cord with a 16A Schuko plug.

Important! Make sure that the plug is accessible even after the successful installation!

In the event that the appliance plug is not easily accessible, the power supply must be equipped with all-pole

disconnect devices with an opening gap for the contacts that allows complete disconnection in conditions of

overvoltage of category III.

Important! If the entire length of the cable is not used, DO NOT roll it on itself but leave it free and make

sure it will not prevent the passage of people and cause danger; also make sure that it is not squashed or bent.

Important! Make sure that the power cord does not come into contact with liquids of any kind and sharp,

hot and corrosive substances.

Do not allow children or pets to play with the power cord.

POSITIONING

The blast chiller is a built-in appliance. Avoid positioning indoors at high temperatures and poor air

exchange, to direct sunlight or weathering, near heat sources. For proper air exchange, it is required to leave

the rear wall of the compartment open, making sure that the interspace for the passage of air is at least 45

mm. (fig. 11).

Installation

min. 45

min. 560

min. 575

min.

535

Fig. 11

Back wall open

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Keine Kommentare

KitchenAid KCBSX 60600 Bedienungsanleitung Seite 18