KitchenAid KHPF 7520/I Bedienungsanleitung PDF herunterladen (Seite 11)

Important: The following procedure must be

carried out by competent technical personnel

only. The hob can be installed on, or into

different types of materials, such as masonry,

metal, wood and heat resistant laminate coated

wood (90°C).

Cut an opening in the worktop to the dimensions

shown in the figure (Fig. 1).

Note: For laminated worktops with a laminate

thickness of less than 3 mm, create a recess as shown as on the

detailed schematic drawing.

Before positioning the hob, apply the adhesive gasket/seal supplied, on

the underneath edge of the hob itself, where the hob will be in contact

with the worktop (Fig. 2).

Once the seal is in place, place the hob into the recess. Secure the hob

into the work surface using the screws and brackets provided,

tightening them until the hob is perfectly flush (Fig. 3).

Carefully trim off the excess gasket/seal. In case of installation on wood

(particularly chipboard), any small spaces between the edge of the

worktop and the hob should be filled with small quantities of silicon

sealant (see Fig. 4). Once the appliance has been installed, the bottom

of the hob should be completely accessible.

Important:

• tighten the fixing brackets of the hob to the work top by hand,

using minimum force.

• In case of wooden (or similar) worktops, before fitting the adhesive

seal protect the surface of the milled recess with a primer.

Fix the hob using the fixing brackets provided.

The appliance is supplied with two types of brackets:

- no. 7 standard length brackets (Service code 4812 404 49874) for

installation on kitchen tops with thickness over 4 cm

- no. 7 long brackets (Service code 4812 404 49875) for installation

on kitchen tops with thickness below 4 cm.

The brackets must be fixed using the appropriate screws both at the

front (no. 4) and at the back (no. 3) using the seats at the bottom of

the hob (Fig. 3).

Fixing the hob to the work top. Flush fitted model

718

510

498

706

511

719

R.10

Fig. 1

Fig. 2

Fig. 3

Fig. 4

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

KitchenAid KHPF 7520/I Bedienungsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder KitchenAid KHPF 7520/I